CCNA Training (Cisco Certified Network Associate)

Grab the opportunity to acquire CISCO Networking skills

ABOUT THE PROGRAM

The motive of the MSP training to design Cisco Certified Network Associate course is to impart technical knowledge to its candidates. The CCNA is just one level above to Cisco Certified Entry Networking Technician (CCENT). It is just one step below the CCNP (Cisco Certified Network Professional). MSP Training under the topic of Cisco training offers five Cisco Career Certification programmes and levels of accreditation. The five different certifications are mentioned below:

  • Beginning Level
  • Professional Level
  • Associate Level
  • Experienced Level
  • Architect Level

Cisco corresponded certification and training provide syllabus for developing business job roles in its latest update. Now, we have different types of CCNA training with the foremost being the "CCNA Routing and Switching". There are Other kinds of CCNA that focus on the following types of areas:

·        Security

 

·        Data centre technologies

 

·        Collaboration

 

·        Industrial plants

 

·        Cloud

 

·        Service providers

 

·        Operations

 

·        Wireless network.

 

·        Design

 

 

  • Enhance your capabilities to use your Cisco products at your maximum potential

  • Clear understanding of the Local Area Network as well as Wide Area Network

  • Get knowledge of routing and switching of network systems

  • After successful completion Delegate can expect high perks

  • MSP training arranges Certified trainers for its training

  • This course is an Ideal one for network professionals

WHAT'S INCLUDED ?

Find out what's included in the training programme.

Includes

Courseware

Courseware will also be provided to the delegates so that they can revise the course after the training.

Includes

Pre Course Material

It provides some basic knowledge about the course before training.

Includes

Tutor Support

A dedicated tutor will be at your disposal throughout the training to guide you through any issues.

Includes

Certificate

Delegates will get certification of completion at the end of the course.

PREREQUISITES

The course is also developed for Novice and there is no mandatory condition to acquire this course. But if a candidate does possesses the knowledge of following topics then they must have an upper edge over the novices:

  • Basic Computer Literacy skills
  • Basic PC Operating System Navigation knowledge
  • Basic Internet Usage knowledge
  • Basic IP Address Knowledge

TARGET AUDIENCE

MSP training designed this course for all those professionals who want to be proficient at CCNA Routing as well as Switching. Furthermore, all those professionals interested in the installation, operation, and verification of LAN networks can opt this course.

WHAT WILL YOU LEARN?

  • Cisco certification demonstrates your Cisco proficiency
  • Delegate will learn about the maintenance of Complex Networks
  • Time management gets better as skilled professionals handle issues in certain time frame
  • Maintenance and checking of tools and applications
  • Make you that much proficient to get the most out of your IT share
  • Certified employees can expect a higher salary
  • Certified Cisco networking experts hold the knowledge to succeed among its peers
  • Cisco provides the right skills to ease into deployment
  • Maintaining and checking Routing-Based Solutions
  • Certified Cisco networking experts are vastly recognised and sought after this certification
  • Maintaining and Troubleshooting Network Security Solutions

Enquire Program

Fill in the form below & we'd get back to you.

PROGRAM OVERVIEW

The purpose of the MSP Training to design this course makes all the enrolled candidates get aware and proficient at CCNA Routing and Switching. All these features make this course a perfect certification programme. With this certification in hand, network professionals with entry-level certifications avail an opportunity to upgrade their skills and networking knowledge than that of earlier knowledge. The delegates surely feel confidence and have industry-ready knowledge after leaving the classroom of MSP training.

At the end of the course, CCNA course under the MSP Training provides the candidates' required skills:

  • Capability to install, arrange, operate, and check medium-size routed and switched networks
  • Configure and optimize network systems
  • Focus on infrastructure pertains to network systems

This course CCNA Training Following  topic as:

 


PROGRAM CONTENT

  • Introduction
    • AAA configuration
    • Building VoIP security
    • IOS firewalls
    • The quintessence behind cryptography
    • Digital signatures
    • Configuring Cisco routers using IOS Software security topographies
    • Configuring network expedients to restrict access from anywhere
    • Maintaining the integrity of network traffic
    • Locking down the Cisco Router
    • PKI and asymmetric encryption
    • Building IPsec VPNs
    • Closing down the Cisco Switch
    • Configuring Intrusion Protection on Cisco devices
    • Setting site-to-site VPNs
    • Firewall features on Cisco devices
    • Constructing a cohesive security policy
    • VRFs
  • Solutions for Network Security Maintenance and Troubleshooting
    • Security Troubleshooting
    • Features of Security Troubleshooting
    • Security Features Review
  • Maintaining and Troubleshooting Integrated
    • Troubleshooting Complex Environments
  • Maintenance and Troubleshooting Tools and Applications
    • Assembling a Basic Diagnostic Toolkit Using Cisco IOS Software
    • Using Specialized Maintenance and Troubleshooting Tools
  • Maintaining and Troubleshooting
    • Troubleshooting VLANs
    • Troubleshooting Spanning Tree
    • Troubleshooting Switched Virtual Interfaces and Inter-VLAN Routing
    • Troubleshooting FHRPs
    • Troubleshooting Performance Problems on Switches
  • Development Maintenance for Complex Networks
    • Network Maintenance Tools, Applications, and Resources
    • Standard Maintenance Processes and Procedures
    • Applying Maintenance Methodologies
  • Planning Troubleshooting Processes
    • Using Troubleshooting Methodologies
    • Planning and Implementing Troubleshooting Procedures
    • Integrating Troubleshooting into the Network Maintenance Process
  • Maintaining and Troubleshooting Routing-Based Solutions
    • Troubleshooting Route Redistribution
    • Troubleshooting Network Layer Connectivity
    • Troubleshooting EIGRP
    • Troubleshooting OSPF
    • Troubleshooting Performance Harms on Routers
    • Troubleshooting BGP
  • Network Essentials
    • Resolve or escalate
    • Verify & monitor resolution
    • Apply troubleshooting procedures to resolve problems
    • Perform and document fault isolation
    • Configure, verify & troubleshoot IPv4 addressing & subnetting
    • Compare & contrast TCP & UDP protocols
    • Impact of infrastructure components in a network
    • Firewalls, Access Points, Wireless controllers
    • Compare & contrast OSI & TCP/IP models
    • Compare & contrast network topologies
    • Star, Mesh, Hybrid
    • Select the appropriate cabling type (Straight & Cross)
    • How cloud resources affect the network architecture
    • Basic virtual network infrastructure
    • Differentiate between collapsed core and three-tier architecture
  • LAN Switching Technologies
    • Trunk ports, Add & remove VLANs on a trunk
    • MAC learning & ageing, Frame switching, Frame flooding, MAC address table
    • PortFast, BPDU guard
    • DTP, VTP (v1&v2), and 802.1Q Native VLAN
    • Configure & verify Layer 2 protocols
    • Configure, test, & troubleshoot (Layer 2/Layer 3) EtherChannel
    • Static, PAGP, LACP
    • Configure, verify, and troubleshoot inter-switch connectivity
    • Configure, test & troubleshoot STP related optional features
    • STP mode (PVST+ and RPVST+), STP root bridge selection
    • Define the benefits of switch stacking & chassis aggregation
    • Interpret Ethernet frame format
    • Cisco Discovery Protocol, LLDP
    • Troubleshoot interface & cable issues (collisions, errors, duplex, speed)
    • Configure, verify, and troubleshoot VLANs (standard/extended range) spanning multiple switches
    • Access ports (data & voice), Default VLAN
    • Describe & check switching concepts
    • Configure, verify, & troubleshoot STP protocols

 

CCNA Training (Cisco Certified Network Associate) Enquiry

 

Enquire Now


----- OR -------

Reach us at 0121 368 7851 or info@msptraining.com for more information.

ABOUT Canterbury

Canterbury is a historic cathedral city located on the River Stour in the Southeast England. It is located 55 miles southeast of London with a population of around 43,432 in 2011 census. The nearby villages and suburbs of the city include Rough Common, Harbledown, Tyler Hill, Hales Place, Sturry, and Wincheap. The River Stour segregates the south-east part of the city into two wings, one wing flowing through the city and other around the position of the former walls. The two wings further combine on the northeast edge of the city. Canterbury local government district covers the area of Herne and Whitstable Bay and Member of Parliament elected in the city is Rosie Duffield of Labour Party. Under Local Government Act, the city became a county borough, later on, it lost its county borough status and afterward, Kent County Council has taken the full control.

History

The first early settlement of Canterbury dates back to prehistoric times. Romans captured the settlement of Celtic tribe in the 1st century and given the name Durovernum Cantiacorum. The city was redeveloped with the construction of the temple, public baths, theatre and roads with grid pattern by the Romans. They also built a wall with seven gates and an earth bank around the city to safeguard from Barbarians attack. After the abandonment of Roman period, Anglo-Saxon community developed within the city walls and trade developed in textile, pottery and leather sector.

The most serious epidemics Black Death affected the city in the 13th century and a population of the city declined from 10,000 to 3,000. Between 17th and 18th century, the castle of the city fell into disrepair and six gates were demolished. The silk industry was closed and trade was limited to only wheat and hops. The world’s first passenger railway came into existence in 1830 connected the town to a larger network of South Eastern Railway. The city was affected by First and Second World War destroyed 296 buildings and 731 homes and resulted in the death of 115 people. The redevelopment of the city took place ten years after the war and ring road was constructed to avoid growing problem of traffic congestion along with the development of Christ Church College and the University of Kent at Canterbury.

Economy

Canterbury is the second largest economy in the Kent and also known as wealthiest places in the south-east. The city is home to 4761 businesses provide job opportunities to more than 60,000 employees. Unemployment in the city has dropped largely with the involvement of Lakesview International Business Park, Whitefriars shopping complex and Canterbury Enterprise Hub. According to a survey in September 2011, unemployment rate recorded at just 5.7% which is quite low as compared to other cities of the England. Tourism plays a crucial role in the development of the city and contributes 258m dollars to the economy.

Education

Canterbury has several primary and secondary schools including Kings School, Barton Court Grammar School, The Canterbury High School and Archbishops School. For higher education, the city has three main universities and several other higher colleges and institutions providing education to 22% of the population according to 2011 census. The universities include the University of Kent, University for the Creative Arts and Canterbury Christ Church University.

Tourism

The city is famous for its beautiful beach fronts, stunning architecture, surrounding coastal towns and world-famous buildings. The tourism of the city is a perfect combination of city, countryside, and coast. The city is also a pilgrimage site and its renowned cathedral is recognised by UNESCO World Heritage Site drawing the attention of million tourists. The top rated tourist attractions in the city include Canterbury Cathedral, St Augustine’s Abbey, Heritage Museum, Norman Castle, Roman Museum, Chilham Castle and St Martin’s Church.