CCNA Training (Cisco Certified Network Associate)

Grab the opportunity to acquire CISCO Networking skills

ABOUT THE PROGRAM

The motive of the MSP training to design Cisco Certified Network Associate course is to impart technical knowledge to its candidates. The CCNA is just one level above to Cisco Certified Entry Networking Technician (CCENT). It is just one step below the CCNP (Cisco Certified Network Professional). MSP Training under the topic of Cisco training offers five Cisco Career Certification programmes and levels of accreditation. The five different certifications are mentioned below:

  • Beginning Level
  • Professional Level
  • Associate Level
  • Experienced Level
  • Architect Level

Cisco corresponded certification and training provide syllabus for developing business job roles in its latest update. Now, we have different types of CCNA training with the foremost being the "CCNA Routing and Switching". There are Other kinds of CCNA that focus on the following types of areas:

·        Security

 

·        Data centre technologies

 

·        Collaboration

 

·        Industrial plants

 

·        Cloud

 

·        Service providers

 

·        Operations

 

·        Wireless network.

 

·        Design

 

 

  • Enhance your capabilities to use your Cisco products at your maximum potential

  • Clear understanding of the Local Area Network as well as Wide Area Network

  • Get knowledge of routing and switching of network systems

  • After successful completion Delegate can expect high perks

  • MSP training arranges Certified trainers for its training

  • This course is an Ideal one for network professionals

WHAT'S INCLUDED ?

Find out what's included in the training programme.

Includes

Courseware

Courseware will also be provided to the delegates so that they can revise the course after the training.

Includes

Pre Course Material

It provides some basic knowledge about the course before training.

Includes

Tutor Support

A dedicated tutor will be at your disposal throughout the training to guide you through any issues.

Includes

Certificate

Delegates will get certification of completion at the end of the course.

PREREQUISITES

The course is also developed for Novice and there is no mandatory condition to acquire this course. But if a candidate does possesses the knowledge of following topics then they must have an upper edge over the novices:

  • Basic Computer Literacy skills
  • Basic PC Operating System Navigation knowledge
  • Basic Internet Usage knowledge
  • Basic IP Address Knowledge

TARGET AUDIENCE

MSP training designed this course for all those professionals who want to be proficient at CCNA Routing as well as Switching. Furthermore, all those professionals interested in the installation, operation, and verification of LAN networks can opt this course.

WHAT WILL YOU LEARN?

  • Cisco certification demonstrates your Cisco proficiency
  • Delegate will learn about the maintenance of Complex Networks
  • Time management gets better as skilled professionals handle issues in certain time frame
  • Maintenance and checking of tools and applications
  • Make you that much proficient to get the most out of your IT share
  • Certified employees can expect a higher salary
  • Certified Cisco networking experts hold the knowledge to succeed among its peers
  • Cisco provides the right skills to ease into deployment
  • Maintaining and checking Routing-Based Solutions
  • Certified Cisco networking experts are vastly recognised and sought after this certification
  • Maintaining and Troubleshooting Network Security Solutions

Enquire Program

Fill in the form below & we'd get back to you.

PROGRAM OVERVIEW

The purpose of the MSP Training to design this course makes all the enrolled candidates get aware and proficient at CCNA Routing and Switching. All these features make this course a perfect certification programme. With this certification in hand, network professionals with entry-level certifications avail an opportunity to upgrade their skills and networking knowledge than that of earlier knowledge. The delegates surely feel confidence and have industry-ready knowledge after leaving the classroom of MSP training.

At the end of the course, CCNA course under the MSP Training provides the candidates' required skills:

  • Capability to install, arrange, operate, and check medium-size routed and switched networks
  • Configure and optimize network systems
  • Focus on infrastructure pertains to network systems

This course CCNA Training Following  topic as:

 


PROGRAM CONTENT

  • Introduction
    • AAA configuration
    • Building VoIP security
    • IOS firewalls
    • The quintessence behind cryptography
    • Digital signatures
    • Configuring Cisco routers using IOS Software security topographies
    • Configuring network expedients to restrict access from anywhere
    • Maintaining the integrity of network traffic
    • Locking down the Cisco Router
    • PKI and asymmetric encryption
    • Building IPsec VPNs
    • Closing down the Cisco Switch
    • Configuring Intrusion Protection on Cisco devices
    • Setting site-to-site VPNs
    • Firewall features on Cisco devices
    • Constructing a cohesive security policy
    • VRFs
  • Solutions for Network Security Maintenance and Troubleshooting
    • Security Troubleshooting
    • Features of Security Troubleshooting
    • Security Features Review
  • Maintaining and Troubleshooting Integrated
    • Troubleshooting Complex Environments
  • Maintenance and Troubleshooting Tools and Applications
    • Assembling a Basic Diagnostic Toolkit Using Cisco IOS Software
    • Using Specialized Maintenance and Troubleshooting Tools
  • Maintaining and Troubleshooting
    • Troubleshooting VLANs
    • Troubleshooting Spanning Tree
    • Troubleshooting Switched Virtual Interfaces and Inter-VLAN Routing
    • Troubleshooting FHRPs
    • Troubleshooting Performance Problems on Switches
  • Development Maintenance for Complex Networks
    • Network Maintenance Tools, Applications, and Resources
    • Standard Maintenance Processes and Procedures
    • Applying Maintenance Methodologies
  • Planning Troubleshooting Processes
    • Using Troubleshooting Methodologies
    • Planning and Implementing Troubleshooting Procedures
    • Integrating Troubleshooting into the Network Maintenance Process
  • Maintaining and Troubleshooting Routing-Based Solutions
    • Troubleshooting Route Redistribution
    • Troubleshooting Network Layer Connectivity
    • Troubleshooting EIGRP
    • Troubleshooting OSPF
    • Troubleshooting Performance Harms on Routers
    • Troubleshooting BGP
  • Network Essentials
    • Resolve or escalate
    • Verify & monitor resolution
    • Apply troubleshooting procedures to resolve problems
    • Perform and document fault isolation
    • Configure, verify & troubleshoot IPv4 addressing & subnetting
    • Compare & contrast TCP & UDP protocols
    • Impact of infrastructure components in a network
    • Firewalls, Access Points, Wireless controllers
    • Compare & contrast OSI & TCP/IP models
    • Compare & contrast network topologies
    • Star, Mesh, Hybrid
    • Select the appropriate cabling type (Straight & Cross)
    • How cloud resources affect the network architecture
    • Basic virtual network infrastructure
    • Differentiate between collapsed core and three-tier architecture
  • LAN Switching Technologies
    • Trunk ports, Add & remove VLANs on a trunk
    • MAC learning & ageing, Frame switching, Frame flooding, MAC address table
    • PortFast, BPDU guard
    • DTP, VTP (v1&v2), and 802.1Q Native VLAN
    • Configure & verify Layer 2 protocols
    • Configure, test, & troubleshoot (Layer 2/Layer 3) EtherChannel
    • Static, PAGP, LACP
    • Configure, verify, and troubleshoot inter-switch connectivity
    • Configure, test & troubleshoot STP related optional features
    • STP mode (PVST+ and RPVST+), STP root bridge selection
    • Define the benefits of switch stacking & chassis aggregation
    • Interpret Ethernet frame format
    • Cisco Discovery Protocol, LLDP
    • Troubleshoot interface & cable issues (collisions, errors, duplex, speed)
    • Configure, verify, and troubleshoot VLANs (standard/extended range) spanning multiple switches
    • Access ports (data & voice), Default VLAN
    • Describe & check switching concepts
    • Configure, verify, & troubleshoot STP protocols

 

CCNA Training (Cisco Certified Network Associate) Enquiry

 

Enquire Now


----- OR -------

Reach us at 0121 368 7851 or info@msptraining.com for more information.

ABOUT Lincoln

Lincoln which is situated in Lincolnshire, is a cathedral city and as per 2011 census had a population of 94,600. In the early periods, it was known as Lindum Colonia, a Roman colony. Lindum Colonia had come up from a settlement of the Iron Age that belonged to the 1st Century B.C. The settlement was the result of a deep pool and the name also probably comes from the word Lindon which was later converted to the Latin form Lindum. The full name for the location was  Colonia Domitiana Lindensium, which went by its founder, Domitian’s name. The colony was established within the walls of the hilltop fortress, to which an extension was also added later on, of an equal area.

Cathedral

First of all the construction of the Lincoln Cathedral began with the see being removed from the backwater of Dorchester-on-Thames, Oxfordshire. It was completed in 1092 but had to be rebuilt after a fire destroyed it. The cause of the fire is said to have been an earthquake that shook Lincoln in 1185. When the Lincoln Minster was rebuilt it had an added portion to the east.  The construction was completed on a superb scale with the crossing tower decorated by a pinnacle that rose to 525 ft, and considered to be the highest Europe has ever had till date. After the completion of all the three spires, the central spire is expected to be the tallest man-made structure in the world after the Great Pyramids of Egypt.

The Bishops of Lincoln were said to be one of the richest people in medieval England. The Diocese of Lincoln, considered to be the biggest in England, was home to more monasteries than the entire English counties put together.

When Magna Carta, the charter to bring peace between the king and rebel barons, was signed, one of the witnesses happened to be the Bishop of Lincoln, Hugh of Wells. There is only one copy that remains of the four originals and that is in the Lincoln Castle.

Lincoln Cathedral

The bishops of Lincoln who were most known were :

  • Robert Bloet
  • Hugh of Avalon
  • Robert Grosseteste
  • Henry Beaufort
  • Thomas Wolsey
  • Philip Repyngdon
  • Thomas Rotherham

Theologian William de Montibus was the chancellor and head of the cathedral school till his death in 1213. The Bishop’s Palace was the centre of administration. Built towards the end of the 12th Century, it was a magnificent building of that era in England. The East Hall of the Palace, designed by Hugh of Lincoln, is the earliest enduring example of a roofed domestic hall. Bishop William of Alnwick was responsible for building the other two parts namely the chapel range and entrance tower. It was he who also improvised upon the existing structure and lend a modern look to it in the 1430s. King Henry VIII and James I are said to have been e guests of the bishops at Lincoln Cathedral. Some royal troops ransacked the cathedral in 1648 during the civil war. The cathedral had another recent break-in due to which the stained glass had to be replaced.

 Notable people

  • Penelope Fitzgerald, born in 1916 was a novelist and biographer
  • George Boole, born in Lincoln in 1815 and developed the Boolean Algebra
  • Sir Francis Hill, mayor of Lincoln was born in Lincoln in 1899.
  • William Byrd, organist and composer
  • Neville Marriner (1924–2016).
  • Sam Clucas, a Hull City footballer was born in Lincoln in 1990.
  • Steve Race, broadcaster, was born in Lincoln

Famous Attractions

  • Jew’s House
  • Jew’s Court
  • Lincoln Castle
  • Lincoln Cathedral
  • Steep Hill
  • Viking Way