CCNA Training (Cisco Certified Network Associate)

Grab the opportunity to acquire CISCO Networking skills

ABOUT THE PROGRAM

The motive of the MSP training to design Cisco Certified Network Associate course is to impart technical knowledge to its candidates. The CCNA is just one level above to Cisco Certified Entry Networking Technician (CCENT). It is just one step below the CCNP (Cisco Certified Network Professional). MSP Training under the topic of Cisco training offers five Cisco Career Certification programmes and levels of accreditation. The five different certifications are mentioned below:

  • Beginning Level
  • Professional Level
  • Associate Level
  • Experienced Level
  • Architect Level

Cisco corresponded certification and training provide syllabus for developing business job roles in its latest update. Now, we have different types of CCNA training with the foremost being the "CCNA Routing and Switching". There are Other kinds of CCNA that focus on the following types of areas:

·        Security

 

·        Data centre technologies

 

·        Collaboration

 

·        Industrial plants

 

·        Cloud

 

·        Service providers

 

·        Operations

 

·        Wireless network.

 

·        Design

 

 

  • Enhance your capabilities to use your Cisco products at your maximum potential

  • Clear understanding of the Local Area Network as well as Wide Area Network

  • Get knowledge of routing and switching of network systems

  • After successful completion Delegate can expect high perks

  • MSP training arranges Certified trainers for its training

  • This course is an Ideal one for network professionals

WHAT'S INCLUDED ?

Find out what's included in the training programme.

Includes

Courseware

Courseware will also be provided to the delegates so that they can revise the course after the training.

Includes

Pre Course Material

It provides some basic knowledge about the course before training.

Includes

Tutor Support

A dedicated tutor will be at your disposal throughout the training to guide you through any issues.

Includes

Certificate

Delegates will get certification of completion at the end of the course.

PREREQUISITES

The course is also developed for Novice and there is no mandatory condition to acquire this course. But if a candidate does possesses the knowledge of following topics then they must have an upper edge over the novices:

  • Basic Computer Literacy skills
  • Basic PC Operating System Navigation knowledge
  • Basic Internet Usage knowledge
  • Basic IP Address Knowledge

TARGET AUDIENCE

MSP training designed this course for all those professionals who want to be proficient at CCNA Routing as well as Switching. Furthermore, all those professionals interested in the installation, operation, and verification of LAN networks can opt this course.

WHAT WILL YOU LEARN?

  • Cisco certification demonstrates your Cisco proficiency
  • Delegate will learn about the maintenance of Complex Networks
  • Time management gets better as skilled professionals handle issues in certain time frame
  • Maintenance and checking of tools and applications
  • Make you that much proficient to get the most out of your IT share
  • Certified employees can expect a higher salary
  • Certified Cisco networking experts hold the knowledge to succeed among its peers
  • Cisco provides the right skills to ease into deployment
  • Maintaining and checking Routing-Based Solutions
  • Certified Cisco networking experts are vastly recognised and sought after this certification
  • Maintaining and Troubleshooting Network Security Solutions

Enquire Program

Fill in the form below & we'd get back to you.

PROGRAM OVERVIEW

The purpose of the MSP Training to design this course makes all the enrolled candidates get aware and proficient at CCNA Routing and Switching. All these features make this course a perfect certification programme. With this certification in hand, network professionals with entry-level certifications avail an opportunity to upgrade their skills and networking knowledge than that of earlier knowledge. The delegates surely feel confidence and have industry-ready knowledge after leaving the classroom of MSP training.

At the end of the course, CCNA course under the MSP Training provides the candidates' required skills:

  • Capability to install, arrange, operate, and check medium-size routed and switched networks
  • Configure and optimize network systems
  • Focus on infrastructure pertains to network systems

This course CCNA Training Following  topic as:

 


PROGRAM CONTENT

  • Introduction
    • AAA configuration
    • Building VoIP security
    • IOS firewalls
    • The quintessence behind cryptography
    • Digital signatures
    • Configuring Cisco routers using IOS Software security topographies
    • Configuring network expedients to restrict access from anywhere
    • Maintaining the integrity of network traffic
    • Locking down the Cisco Router
    • PKI and asymmetric encryption
    • Building IPsec VPNs
    • Closing down the Cisco Switch
    • Configuring Intrusion Protection on Cisco devices
    • Setting site-to-site VPNs
    • Firewall features on Cisco devices
    • Constructing a cohesive security policy
    • VRFs
  • Solutions for Network Security Maintenance and Troubleshooting
    • Security Troubleshooting
    • Features of Security Troubleshooting
    • Security Features Review
  • Maintaining and Troubleshooting Integrated
    • Troubleshooting Complex Environments
  • Maintenance and Troubleshooting Tools and Applications
    • Assembling a Basic Diagnostic Toolkit Using Cisco IOS Software
    • Using Specialized Maintenance and Troubleshooting Tools
  • Maintaining and Troubleshooting
    • Troubleshooting VLANs
    • Troubleshooting Spanning Tree
    • Troubleshooting Switched Virtual Interfaces and Inter-VLAN Routing
    • Troubleshooting FHRPs
    • Troubleshooting Performance Problems on Switches
  • Development Maintenance for Complex Networks
    • Network Maintenance Tools, Applications, and Resources
    • Standard Maintenance Processes and Procedures
    • Applying Maintenance Methodologies
  • Planning Troubleshooting Processes
    • Using Troubleshooting Methodologies
    • Planning and Implementing Troubleshooting Procedures
    • Integrating Troubleshooting into the Network Maintenance Process
  • Maintaining and Troubleshooting Routing-Based Solutions
    • Troubleshooting Route Redistribution
    • Troubleshooting Network Layer Connectivity
    • Troubleshooting EIGRP
    • Troubleshooting OSPF
    • Troubleshooting Performance Harms on Routers
    • Troubleshooting BGP
  • Network Essentials
    • Resolve or escalate
    • Verify & monitor resolution
    • Apply troubleshooting procedures to resolve problems
    • Perform and document fault isolation
    • Configure, verify & troubleshoot IPv4 addressing & subnetting
    • Compare & contrast TCP & UDP protocols
    • Impact of infrastructure components in a network
    • Firewalls, Access Points, Wireless controllers
    • Compare & contrast OSI & TCP/IP models
    • Compare & contrast network topologies
    • Star, Mesh, Hybrid
    • Select the appropriate cabling type (Straight & Cross)
    • How cloud resources affect the network architecture
    • Basic virtual network infrastructure
    • Differentiate between collapsed core and three-tier architecture
  • LAN Switching Technologies
    • Trunk ports, Add & remove VLANs on a trunk
    • MAC learning & ageing, Frame switching, Frame flooding, MAC address table
    • PortFast, BPDU guard
    • DTP, VTP (v1&v2), and 802.1Q Native VLAN
    • Configure & verify Layer 2 protocols
    • Configure, test, & troubleshoot (Layer 2/Layer 3) EtherChannel
    • Static, PAGP, LACP
    • Configure, verify, and troubleshoot inter-switch connectivity
    • Configure, test & troubleshoot STP related optional features
    • STP mode (PVST+ and RPVST+), STP root bridge selection
    • Define the benefits of switch stacking & chassis aggregation
    • Interpret Ethernet frame format
    • Cisco Discovery Protocol, LLDP
    • Troubleshoot interface & cable issues (collisions, errors, duplex, speed)
    • Configure, verify, and troubleshoot VLANs (standard/extended range) spanning multiple switches
    • Access ports (data & voice), Default VLAN
    • Describe & check switching concepts
    • Configure, verify, & troubleshoot STP protocols

 

CCNA Training (Cisco Certified Network Associate) Enquiry

 

Enquire Now


----- OR -------

Reach us at 0121 368 7851 or info@msptraining.com for more information.

ABOUT Plymouth

Plymouth is a port city in Devon that also goes by the name of the Ocean City of Britain. The city is known for its narrow cobbled streets and a maritime heritage. Plymouth lies between the mouths of the two rivers  - Plym and Tamar – and hence its name. The first settlers had come to Plymouth in the Bronze Age. It was in 1620 that the Pilgrim Fathers departed from Plymouth in search of some New World. They established a new colony at the time known as the Plymouth Colony and later as The United States of America.

Plymouth grew during the Industrial Revolution as a Commercial Shipping Port. Imports and passengers both poured into Plymouth from the Americas. Plymouth was also using its ports to export minerals such as time, lime, china clay, copper and arsenic. In 1928 Plymouth achieved a city status when three of its neighbours also joined together under the same name. During the Second World War, Plymouth was a target for the Nazi forces as it sided with the Allied forces.

Governed locally by Plymouth City Council, the city is home to 264,200 people as per the data collected in 2016. The economy of Plymouth has for long been influenced by industries such as Ship-building and sea-faring, but since the 1990’s it is turning more towards the service-based industry. In the whole of Western Europe, Plymouth is home to the biggest Naval-base.

Plymouth 2020

In 2003, Plymouth Council started the "Vision for Plymouth" – a project for the development of the city of Plymouth.  The project aims to build shopping centres, an avenue as a part of the project and a cruise terminal. Another aim of the project is to increase the population to 300,000. 2004 saw the old Drake Circus being demolished and replaced by the Drake Circus Shopping Centre that opened in October 2006. In one of another project,  the Plymouth City Council's headquarters are to be shifted and the civic centre to be demolished. The demolished land of civic centre will be sold so as to generate revenue for building the new council headquarters.at the location where the Bretonside bus station is currently located. The Plymouth Pavillion arena is also up for demolition in one of the projects. This would be replaced by a new canal links from Millbay to the city centre.

People

People from Plymouth are known either as Plymothians or as Janners from somebody who hails from Devon. Devon stands for Cousin Jan( a form of John).

  • Sir Francis Drake, who was a navigator, was born in the town of Tavistock and also went on to become the mayor of Plymouth. He became the first Englishman to explore the entire world and came to be known as El Draco ("The Dragon") by the Spanish as he had raided many of their ships. He died in 1596.
  • Painter Sir Joshua Reynolds was born in Plympton, which is now a part of Plymouth. He went on to become the founder and first president of the Royal Academy.
  • William Cookworthy is known to have set up his porcelain business in Plymouth.
  • Benjamin Robert Haydon, an English painter, was born in Plymouth on 26 January 1786. Benjamin Robert Haydon was known for his grand historical pictures.
  • The person who was responsible for paving the way for Charles Darwin was born here. Known as Dr William Elford Leach, he was born at Hoe Gate in 1791 in Plymouth.
  • The two artists Beryl Cook and Robert Lenkiewicz lived in Plymouth. Beryl Cook was known for his paintings that depict culture. Robert Lenkiewicz was known to paint themes of vagrancy, sex and suicide. He lived in Plymouth for around 42 years until his death in  2002.