CCNP Training (Cisco Certified Network Professional)

The Cisco Certified Network Professional (CCNP) training is designed for candidates who have one-year experience in the networking field. The job of  CCNP professionals is to plan, execute, confirm and repair both Wide Area Network and Local Area Network. In addition to this, they are also responsible to work with other network specialists to get the desired results. At MSP Training, we make sure the knowledge and skills that you learn from this platform provide you with a lasting foundation. It will not only benefit you today but also relevant in the physical as well as the virtualized networks in the succeeding years.

While developing CCNP training, the main focus of MSP training is to concentrate on all those aspects that help in the professional growth of a candidate. Once the candidate is proficient, he or she can get a job easily after successful completion of the course. These skills help him or her, even to gain promotions to higher levels. We also give due importance to close observation to the skills pertains to routing, switching and checking of the candidate. The process of day to day evaluation kept in records for future reference.

Routing

Network Principles

• Recognise Cisco Express Forwarding terms
• Describe general web challenges
• Analyse IP Working
• Describe TCP working
• UDP operations
• Identify suggested changes to the network

Layer 2 Technologies

• Arrange and verify PPP
• Explain Frame Relay

Level 3 Skills and Tools

• Categorise, design, and approve IPv4 addressing and subnetting
• Acknowledge IPv6 addressing and subnetting
• Arrange and verify static routing
• Configure and genuine default routing
• Classify routing protocol categories
• Explain administrative distance
• Check passive interfaces
• Arrange and Scrutinise VRF Lite
• Arrange and validate filtering with any protocol
• Arrange and Scrutinise redistribution between any routing protocols and routing sources
• Arrange and validate manual and auto-summarization with any routing protocol
• Arrange and validate policy-based routing
• Distinction of suboptimal routing
• Explain ROUTE maps
• Configure and authenticate loop prevention mechanisms
• Configure and verify RIPv2
• Describe RIPng
• Describe EIGRP packet types
• Configure and verify EIGRP neighbour relationship and authentication
• Configure and verify EIGRP stubs
• Configure and verify EIGRP load balancing
• Describe and optimize EIGRP metrics
• Configure and verify EIGRP for IPv6
• Describe OSPF packet types
• Constitute and validate OSPF neighbour relationship and authentication
• Configure and validate network types, area types, and router types
• Configure and verify OSPF path preference
• Configure and verify OSPF operations
• Configure and verify OSPF for IPv6
• Describe, configure, and verify BGP peer relationships and authentication
• Configure and verify e-BGP (IPv4 and IPv6 address families)
• Explain BGP attributes and best-path selection

VPN Technologies

• Configure and verify GRE
• Describe DMVPN (single hub)
• Describe Easy Virtual Networking (EVN)

Security of Infrastructure

• Describe IOS AAA using local database
• Define device security using IOS AAA with TACACS+ and RADIUS
• Configure and verify device access control
• Configure and verify router security features

Infrastructure Services

• Configure and verify device management
• Configure and verify SNMP
• Configure and verify logging
• Configure and verify Network Time Protocol (NTP)
• Configure and verify IPv4 and IPv6 DHCP
• Setup and validate IPv4 Network Address Translation (NAT)
• Describe IPv6 NAT
• Describe SLA architecture
• Configure and verify IP SLA
• Configure and check tracking objects
• Fine-tune and validate Cisco Net Flow

SWITCHING (300-115)

Layer 2 Technologies

• Configure and test switch administration
• Configure and verify Layer 2 protocols
• Configure and verify VLANs
• Configure and verify trunking
• Configure and test Ether Channels
• Configure and verify spanning tree
• Configure and check other LAN switching technologies
• Describe chassis virtualization and aggregation technologies

Set-up Security

• Configure and validate switch security features
• Define device security using Cisco IOS AAA with TACACS+ and RADIUS

Setup Services

Configure and verify first-hop redundancy protocols

TROUBLESHOOTING (300-135)

Network Principles

• Use Cisco IOS troubleshooting tools
• Apply troubleshooting methodologies

Layer 2 Technologies

• Troubleshoot switch administration
• Troubleshoot Layer 2 protocols
• Troubleshoot VLANs
• Troubleshoot trunking
• Troubleshoot Ether Channels
• Troubleshoot spanning tree
• Troubleshoot other LAN switching technologies
• Troubleshoot chassis virtualization and aggregation technologies

Level 3 Know-hows

• Troubleshoot IPv4 addressing and subnetting
• Troubleshoot IPv6 addressing and subnetting
• Troubleshoot static routing
• Troubleshoot default routing
• Troubleshoot administrative distance
• Troubleshoot passive interfaces
• Troubleshoot VRF Lite
• Troubleshoot filtering with any protocol
• Fine-tune between any routing protocols or routing sources
• Troubleshoot manual and auto-summarization with any routing protocol
• Troubleshoot policy-based routing
• Troubleshoot suboptimal routing
• Troubleshoot loop prevention mechanisms
• Troubleshoot RIPv2
• Troubleshoot EIGRP neighbour relationship and authentication
• Troubleshoot loop-free path selection
• Troubleshoot EIGPR operations
• Troubleshoot EIGRP stubs
• Troubleshoot EIGRP load balancing
• Troubleshoot EIGRP metrics
• Troubleshoot EIGRP for IPv6
• Troubleshoot OSPF neighbour relationship and authentication
• Fine-tune network types, area types, and router types
• Troubleshoot OSPF path preference
• Troubleshoot OSPF operations
• Troubleshoot OSPF for IPv6
• Troubleshoot BGP peer relationships and authentication
• Troubleshoot e-BGP