CCNP Training (Cisco Certified Network Professional)

Be proficient at switching and routing in networking

ABOUT THE PROGRAM

The Cisco Certified Network Professional (CCNP) training is designed for candidates who have one-year experience in the networking field. The job of  CCNP professionals is to plan, execute, confirm and repair both Wide Area Network and Local Area Network. In addition to this, they are also responsible to work with other network specialists to get the desired results. At MSP Training, we make sure the knowledge and skills that you learn from this platform provide you with a lasting foundation. It will not only benefit you today but also relevant in the physical as well as the virtualized networks in the succeeding years.

  • Get training from certified instructors

  • Key learning points and tutor support

  • Networking skills

  • Get salary hike with CCNP Professional status

WHAT'S INCLUDED ?

Find out what's included in the training programme.

Includes

Key Learning Points

Clear and concise objectives to guide delegates through the course.

Includes

Tutor Support

A dedicated tutor will be at your disposal throughout the training to guide you through any issues.

Includes

Courseware

Courseware will also be provided to the delegates so that they can revise the course after the training.

PREREQUISITES

The mandatory condition is to have one-year experience in the networking field. Such norms must be as needed by ICND1 and ICND2. Furthermore, those who want to possess some equivalent skill can also opt this course.

TARGET AUDIENCE

  • All the Web professionals
  • Web technical support staff
  • Helpdesk professionals
  • Those involved in implementation and verification of routing protocols in other networks.

.

WHAT WILL YOU LEARN?

 After successful completion of the course, the candidates will learn how to:

  • Plan layout and make a document.
  • Scrutinisation of routing protocols in enterprise network.
  • Recognise the terms, components, and metrics of EIGRP.
  • Recognise, Scrutinise, and match OSPF multiarea routing functions and benefits.
  • Execute and verify the redistribution solution in a multiprotocol network using Cisco IOS Software features.
  • Assess mutual web performance issues and recognise the tools that need to provide Layer 3 path control. Further, it can use Cisco IOS Software characteristic to command the path.
  • Execute and ensure a Layer 3 solution using BGP to fix an enterprise network to a service provider.

Enquire Program

Fill in the form below & we'd get back to you.

PROGRAM OVERVIEW

While developing CCNP training, the main focus of MSP training is to concentrate on all those aspects that help in the professional growth of a candidate. Once the candidate is proficient, he or she can get a job easily after successful completion of the course. These skills help him or her, even to gain promotions to higher levels. We also give due importance to close observation to the skills pertains to routing, switching and checking of the candidate. The process of day to day evaluation kept in records for future reference.


PROGRAM CONTENT

Routing

Network Principles

  • Recognise Cisco Express Forwarding terms
  • Describe general web challenges
  • Analyse IP Working
  • Describe TCP working
  • UDP operations
  • Identify suggested changes to the network

Layer 2 Technologies

  • Arrange and verify PPP
  • Explain Frame Relay

Level 3 Skills and Tools

  • Categorise, design, and approve IPv4 addressing and subnetting
  • Acknowledge IPv6 addressing and subnetting
  • Arrange and verify static routing
  • Configure and genuine default routing
  • Classify routing protocol categories
  • Explain administrative distance
  • Check passive interfaces
  • Arrange and Scrutinise VRF Lite
  • Arrange and validate filtering with any protocol
  • Arrange and Scrutinise redistribution between any routing protocols and routing sources
  • Arrange and validate manual and auto-summarization with any routing protocol
  • Arrange and validate policy-based routing
  • Distinction of suboptimal routing
  • Explain ROUTE maps
  • Configure and authenticate loop prevention mechanisms
  • Configure and verify RIPv2
  • Describe RIPng
  • Describe EIGRP packet types
  • Configure and verify EIGRP neighbour relationship and authentication
  • Configure and verify EIGRP stubs
  • Configure and verify EIGRP load balancing
  • Describe and optimize EIGRP metrics
  • Configure and verify EIGRP for IPv6
  • Describe OSPF packet types
  • Constitute and validate OSPF neighbour relationship and authentication
  • Configure and validate network types, area types, and router types
  • Configure and verify OSPF path preference
  • Configure and verify OSPF operations
  • Configure and verify OSPF for IPv6
  • Describe, configure, and verify BGP peer relationships and authentication
  • Configure and verify e-BGP (IPv4 and IPv6 address families)
  • Explain BGP attributes and best-path selection

VPN Technologies

  • Configure and verify GRE
  • Describe DMVPN (single hub)
  • Describe Easy Virtual Networking (EVN)

Security of Infrastructure

  • Describe IOS AAA using local database
  • Define device security using IOS AAA with TACACS+ and RADIUS
  • Configure and verify device access control
  • Configure and verify router security features

Infrastructure Services

  • Configure and verify device management
  • Configure and verify SNMP
  • Configure and verify logging
  • Configure and verify Network Time Protocol (NTP)
  • Configure and verify IPv4 and IPv6 DHCP
  • Setup and validate IPv4 Network Address Translation (NAT)
  • Describe IPv6 NAT
  • Describe SLA architecture
  • Configure and verify IP SLA
  • Configure and check tracking objects
  • Fine-tune and validate Cisco Net Flow

SWITCHING (300-115)

Layer 2 Technologies

  • Configure and test switch administration
  • Configure and verify Layer 2 protocols
  • Configure and verify VLANs
  • Configure and verify trunking
  • Configure and test Ether Channels
  • Configure and verify spanning tree
  • Configure and check other LAN switching technologies
  • Describe chassis virtualization and aggregation technologies

Set-up Security

  • Configure and validate switch security features
  • Define device security using Cisco IOS AAA with TACACS+ and RADIUS

Setup Services

Configure and verify first-hop redundancy protocols

TROUBLESHOOTING (300-135)

Network Principles

  • Use Cisco IOS troubleshooting tools
  • Apply troubleshooting methodologies

Layer 2 Technologies

  • Troubleshoot switch administration
  • Troubleshoot Layer 2 protocols
  • Troubleshoot VLANs
  • Troubleshoot trunking
  • Troubleshoot Ether Channels
  • Troubleshoot spanning tree
  • Troubleshoot other LAN switching technologies
  • Troubleshoot chassis virtualization and aggregation technologies

Level 3 Know-hows

  • Troubleshoot IPv4 addressing and subnetting
  • Troubleshoot IPv6 addressing and subnetting
  • Troubleshoot static routing
  • Troubleshoot default routing
  • Troubleshoot administrative distance
  • Troubleshoot passive interfaces
  • Troubleshoot VRF Lite
  • Troubleshoot filtering with any protocol
  • Fine-tune between any routing protocols or routing sources
  • Troubleshoot manual and auto-summarization with any routing protocol
  • Troubleshoot policy-based routing
  • Troubleshoot suboptimal routing
  • Troubleshoot loop prevention mechanisms
  • Troubleshoot RIPv2
  • Troubleshoot EIGRP neighbour relationship and authentication
  • Troubleshoot loop-free path selection
  • Troubleshoot EIGPR operations
  • Troubleshoot EIGRP stubs
  • Troubleshoot EIGRP load balancing
  • Troubleshoot EIGRP metrics
  • Troubleshoot EIGRP for IPv6
  • Troubleshoot OSPF neighbour relationship and authentication
  • Fine-tune network types, area types, and router types
  • Troubleshoot OSPF path preference
  • Troubleshoot OSPF operations
  • Troubleshoot OSPF for IPv6
  • Troubleshoot BGP peer relationships and authentication
  • Troubleshoot e-BGP

 

CCNP Training (Cisco Certified Network Professional) Enquiry

 

Enquire Now


----- OR -------

Reach us at 0121 368 7851 or info@msptraining.com for more information.

ABOUT Bath

Bath city is a largest city in the Lieutenancy areas of England. The city has geographical area of 11 squares miles with 88,859  population in 2011. The bath city is situated in the valley of the river Avon which is 97 miles west of capital city,London. The city is also near to Bristol town. This city is well-known for its hot springs, which further lead to Spa  Industry. On arrival of Romans, they built a temple and baths in the valley of river Avon. As per the previous records, the hot springs were present there since ancient time. But the site got explored when Romans entered the city. The 7th century, centre known as Bath Abbey went through renovations in 12th and 16th centuries. In 17th century, it became belief of local people that this water is special one and has so many curative properties. It brought both the popularity and tourists to the town. Apart from this, It offers a wide range of attractions including restaurants, businesses, theatres and city tours with 4.4 million visitors each year. The historic Roman Baths and Thermae Bath Spa giving their services to the city.

History

Earlier the motive of the Romans while constructing the bath was to used it for medicinal purposes. But the popularity of the water rose very quickly, so it was used for other purposes as well. In the medieval period, the wool industry went extra mile in production as  new equipment and tool were introduced .They focused in the industry well and took it to new height. The town get distinguished after the introduction of neoclassical Palladian art, literature, and building under regime of George I,II, and III in the 18th century . Romans used this bath for their Pleasure. Number of baths were built after one another. Most of them built near hot springs. The Minerva goddess temple also built alongside one bath. In 3rd century, Walls built near boundary to save it from attack. Following collapse of Roman Empire, the town expanded nearly 760. King Offa constructed  An abbey, dedicated to St. Peter. In the 15th century, the Abbey church of Bath city was broken down.

Culture

During the 18th century bath became the centre of fashionable life in England and attracted internationally renowned companies and directors with its five famous theatres. The city hosts the annual Bath International Music Festival and Mozartfest, the yearly Bath Literature Festival, and the Bath Film Festival.The Bath city is home to the Victoria Art Gallery (which is named after Queen Victoria), the Museum of East Asian Art, and Holburne Museum, as well as some other museums.

Climate

The climatic condition of Bath is far cry from rest of the country. The variation in the seasonal temperature is less as compared to the most of the United Kingdom due to adjacent sea temperature. In summer the maximum temperature is maximum to 21° C whereas minimum temperature goes to 1° or 2° C in winter. The average rainfall is near about 700mm with typically 8 to 15 days of snowfall.

Education

The Bath city has sufficient number of educational schools . It has two universities, the University of Bath which was established in 1996 offering programs in languages, engineering, architecture, politics etc. with 17,308 students out of which more than 30% are from outside the UK. Second is Bath Spa University which was given degree-awarding powers in 1992 and university status in 2005 offering courses leading to a Postgraduate certificate in education. The city has private and public schools, several sixth forms as part of state, Bath College, and one education college.