CCNP Training (Cisco Certified Network Professional)

Be proficient at switching and routing in networking

ABOUT THE PROGRAM

The Cisco Certified Network Professional (CCNP) training is designed for candidates who have one-year experience in the networking field. The job of  CCNP professionals is to plan, execute, confirm and repair both Wide Area Network and Local Area Network. In addition to this, they are also responsible to work with other network specialists to get the desired results. At MSP Training, we make sure the knowledge and skills that you learn from this platform provide you with a lasting foundation. It will not only benefit you today but also relevant in the physical as well as the virtualized networks in the succeeding years.

  • Get training from certified instructors

  • Key learning points and tutor support

  • Networking skills

  • Get salary hike with CCNP Professional status

WHAT'S INCLUDED ?

Find out what's included in the training programme.

Includes

Key Learning Points

Clear and concise objectives to guide delegates through the course.

Includes

Tutor Support

A dedicated tutor will be at your disposal throughout the training to guide you through any issues.

Includes

Courseware

Courseware will also be provided to the delegates so that they can revise the course after the training.

PREREQUISITES

The mandatory condition is to have one-year experience in the networking field. Such norms must be as needed by ICND1 and ICND2. Furthermore, those who want to possess some equivalent skill can also opt this course.

TARGET AUDIENCE

  • All the Web professionals
  • Web technical support staff
  • Helpdesk professionals
  • Those involved in implementation and verification of routing protocols in other networks.

.

WHAT WILL YOU LEARN?

 After successful completion of the course, the candidates will learn how to:

  • Plan layout and make a document.
  • Scrutinisation of routing protocols in enterprise network.
  • Recognise the terms, components, and metrics of EIGRP.
  • Recognise, Scrutinise, and match OSPF multiarea routing functions and benefits.
  • Execute and verify the redistribution solution in a multiprotocol network using Cisco IOS Software features.
  • Assess mutual web performance issues and recognise the tools that need to provide Layer 3 path control. Further, it can use Cisco IOS Software characteristic to command the path.
  • Execute and ensure a Layer 3 solution using BGP to fix an enterprise network to a service provider.

Enquire Program

Fill in the form below & we'd get back to you.

PROGRAM OVERVIEW

While developing CCNP training, the main focus of MSP training is to concentrate on all those aspects that help in the professional growth of a candidate. Once the candidate is proficient, he or she can get a job easily after successful completion of the course. These skills help him or her, even to gain promotions to higher levels. We also give due importance to close observation to the skills pertains to routing, switching and checking of the candidate. The process of day to day evaluation kept in records for future reference.


PROGRAM CONTENT

Routing

Network Principles

  • Recognise Cisco Express Forwarding terms
  • Describe general web challenges
  • Analyse IP Working
  • Describe TCP working
  • UDP operations
  • Identify suggested changes to the network

Layer 2 Technologies

  • Arrange and verify PPP
  • Explain Frame Relay

Level 3 Skills and Tools

  • Categorise, design, and approve IPv4 addressing and subnetting
  • Acknowledge IPv6 addressing and subnetting
  • Arrange and verify static routing
  • Configure and genuine default routing
  • Classify routing protocol categories
  • Explain administrative distance
  • Check passive interfaces
  • Arrange and Scrutinise VRF Lite
  • Arrange and validate filtering with any protocol
  • Arrange and Scrutinise redistribution between any routing protocols and routing sources
  • Arrange and validate manual and auto-summarization with any routing protocol
  • Arrange and validate policy-based routing
  • Distinction of suboptimal routing
  • Explain ROUTE maps
  • Configure and authenticate loop prevention mechanisms
  • Configure and verify RIPv2
  • Describe RIPng
  • Describe EIGRP packet types
  • Configure and verify EIGRP neighbour relationship and authentication
  • Configure and verify EIGRP stubs
  • Configure and verify EIGRP load balancing
  • Describe and optimize EIGRP metrics
  • Configure and verify EIGRP for IPv6
  • Describe OSPF packet types
  • Constitute and validate OSPF neighbour relationship and authentication
  • Configure and validate network types, area types, and router types
  • Configure and verify OSPF path preference
  • Configure and verify OSPF operations
  • Configure and verify OSPF for IPv6
  • Describe, configure, and verify BGP peer relationships and authentication
  • Configure and verify e-BGP (IPv4 and IPv6 address families)
  • Explain BGP attributes and best-path selection

VPN Technologies

  • Configure and verify GRE
  • Describe DMVPN (single hub)
  • Describe Easy Virtual Networking (EVN)

Security of Infrastructure

  • Describe IOS AAA using local database
  • Define device security using IOS AAA with TACACS+ and RADIUS
  • Configure and verify device access control
  • Configure and verify router security features

Infrastructure Services

  • Configure and verify device management
  • Configure and verify SNMP
  • Configure and verify logging
  • Configure and verify Network Time Protocol (NTP)
  • Configure and verify IPv4 and IPv6 DHCP
  • Setup and validate IPv4 Network Address Translation (NAT)
  • Describe IPv6 NAT
  • Describe SLA architecture
  • Configure and verify IP SLA
  • Configure and check tracking objects
  • Fine-tune and validate Cisco Net Flow

SWITCHING (300-115)

Layer 2 Technologies

  • Configure and test switch administration
  • Configure and verify Layer 2 protocols
  • Configure and verify VLANs
  • Configure and verify trunking
  • Configure and test Ether Channels
  • Configure and verify spanning tree
  • Configure and check other LAN switching technologies
  • Describe chassis virtualization and aggregation technologies

Set-up Security

  • Configure and validate switch security features
  • Define device security using Cisco IOS AAA with TACACS+ and RADIUS

Setup Services

Configure and verify first-hop redundancy protocols

TROUBLESHOOTING (300-135)

Network Principles

  • Use Cisco IOS troubleshooting tools
  • Apply troubleshooting methodologies

Layer 2 Technologies

  • Troubleshoot switch administration
  • Troubleshoot Layer 2 protocols
  • Troubleshoot VLANs
  • Troubleshoot trunking
  • Troubleshoot Ether Channels
  • Troubleshoot spanning tree
  • Troubleshoot other LAN switching technologies
  • Troubleshoot chassis virtualization and aggregation technologies

Level 3 Know-hows

  • Troubleshoot IPv4 addressing and subnetting
  • Troubleshoot IPv6 addressing and subnetting
  • Troubleshoot static routing
  • Troubleshoot default routing
  • Troubleshoot administrative distance
  • Troubleshoot passive interfaces
  • Troubleshoot VRF Lite
  • Troubleshoot filtering with any protocol
  • Fine-tune between any routing protocols or routing sources
  • Troubleshoot manual and auto-summarization with any routing protocol
  • Troubleshoot policy-based routing
  • Troubleshoot suboptimal routing
  • Troubleshoot loop prevention mechanisms
  • Troubleshoot RIPv2
  • Troubleshoot EIGRP neighbour relationship and authentication
  • Troubleshoot loop-free path selection
  • Troubleshoot EIGPR operations
  • Troubleshoot EIGRP stubs
  • Troubleshoot EIGRP load balancing
  • Troubleshoot EIGRP metrics
  • Troubleshoot EIGRP for IPv6
  • Troubleshoot OSPF neighbour relationship and authentication
  • Fine-tune network types, area types, and router types
  • Troubleshoot OSPF path preference
  • Troubleshoot OSPF operations
  • Troubleshoot OSPF for IPv6
  • Troubleshoot BGP peer relationships and authentication
  • Troubleshoot e-BGP

 

CCNP Training (Cisco Certified Network Professional) Enquiry

 

Enquire Now


----- OR -------

Reach us at 0121 368 7851 or info@msptraining.com for more information.

ABOUT Gloucester

Gloucester is the non-metropolitan county of Gloucestershire with a population of around 121,900 according to 2011 census. It is a 53rd populous city in the United Kingdom. It is situated near the Welsh border on the eastern bank of the Severn River. Gloucester is a city in the southwest England and lies between the Forest of Dean and the Cotswolds rural area. Roman Emperor Nerva founded the city in AD 97. The first charter was granted to the city in 1155, gave the inhabitants the same rights as the civilians of London and the second charter gave the freedom of passage on the Severn River. The town’s economy is largely based on the service industry. The city is said to have been dominated by the aerospace industry in its earlier times.

History

The early settlement of the city found its root back to the Roman period. Romans built the Glevum, a Roman fort that became a colonia of retired legionaries. The number of remains, parts of the walls and coins have been discovered, and other Roman artefacts and tombstones are stored in the Gloucester City Museum. During the 4th century, Celtic Dubonni tribe had taken control of the city after the withdrawal of the Roman Empire. Until 584, the city became a part of Wessex in the Anglo-Saxon Chronicle. The city derived its name from the Anglo-Saxon fort.       

In 577, the Saxons occupied the city. Its geographical location and the foundation of St Peter abbey contributed towards the growth of the town. The city was a borough with a castle before the Norman invasion of England. The remains of Northumbria King, Saint Oswald, brought to the small church at the beginning of the 10th century, attracted many pilgrims to the town. Recently, a unique coin was discovered in the north of the city dates back to 1077-80. The city had a large fishing industry in the medieval period. The main export was wool, leather, weapons and tools at that time. During the 14th century, the most significant period began in the history of the town with the convention of Parliament in Gloucester. The two grammar schools were built in the city in the 16th and 17th century: Sir Thomas Rich’s School and the Crypt School.

Transport

M5 motorway serves the Gloucester and runs to the east of the city. The north, central and south city is also served by Junction 11, Junction 11 a and Junction 12 respectively. The A38 connects the town with the cities of Bristol and Tewkesbury (civil parish in Gloucestershire) and runs to the north-south of the city, while A40, A46, A417 links Gloucester with the towns of Cheltenham, Monmouth and Cirencester. The city was the lowest bridging point on the river before the construction of Severn Bridge in 1966. The central railway station serves the city of Gloucester in England and connects to the cities of Reading, Nottingham, London, Cardiff and Birmingham.

Industry

Historically, the city was dominated by the aerospace business. The Gloucestershire Aircraft Company renamed as Gloster Aircraft Company in 1926 as international customers found difficult to pronounce ‘Gloucestershire’. The aviation history is celebrated by the sculpture in the city centre. The city is home to the large insurance company Ecclesiastical Insurance and Allchurches Trust, a large national charity in the United Kingdom. The TSB Bank and Lloyds Banking Group have their offices located in the city. A Business Park is located on the periphery of the city and has close links to the A417 and M5. The big brands including Detica, Direct Wines, Ageas and Fortis have their presence in the business park. The industrial history of the city is celebrated at the National Waterways Museum with interactive displays and canal boats.

Attractions

The famous places to visit in the city include Gloucester Cathedral, The Museum of Gloucester, National Waterways Museum, Gloucester Quays and Docks, Gloucestershire Arts and Crafts Centre, Jet Age Museum, Prinknash Abbey, The Barn Owl Centre and much more exciting locations.