CCNP Training (Cisco Certified Network Professional)

Be proficient at switching and routing in networking

ABOUT THE PROGRAM

The Cisco Certified Network Professional (CCNP) training is designed for candidates who have one-year experience in the networking field. The job of  CCNP professionals is to plan, execute, confirm and repair both Wide Area Network and Local Area Network. In addition to this, they are also responsible to work with other network specialists to get the desired results. At MSP Training, we make sure the knowledge and skills that you learn from this platform provide you with a lasting foundation. It will not only benefit you today but also relevant in the physical as well as the virtualized networks in the succeeding years.

  • Get training from certified instructors

  • Key learning points and tutor support

  • Networking skills

  • Get salary hike with CCNP Professional status

WHAT'S INCLUDED ?

Find out what's included in the training programme.

Includes

Key Learning Points

Clear and concise objectives to guide delegates through the course.

Includes

Tutor Support

A dedicated tutor will be at your disposal throughout the training to guide you through any issues.

Includes

Courseware

Courseware will also be provided to the delegates so that they can revise the course after the training.

PREREQUISITES

The mandatory condition is to have one-year experience in the networking field. Such norms must be as needed by ICND1 and ICND2. Furthermore, those who want to possess some equivalent skill can also opt this course.

TARGET AUDIENCE

  • All the Web professionals
  • Web technical support staff
  • Helpdesk professionals
  • Those involved in implementation and verification of routing protocols in other networks.

.

WHAT WILL YOU LEARN?

 After successful completion of the course, the candidates will learn how to:

  • Plan layout and make a document.
  • Scrutinisation of routing protocols in enterprise network.
  • Recognise the terms, components, and metrics of EIGRP.
  • Recognise, Scrutinise, and match OSPF multiarea routing functions and benefits.
  • Execute and verify the redistribution solution in a multiprotocol network using Cisco IOS Software features.
  • Assess mutual web performance issues and recognise the tools that need to provide Layer 3 path control. Further, it can use Cisco IOS Software characteristic to command the path.
  • Execute and ensure a Layer 3 solution using BGP to fix an enterprise network to a service provider.

Enquire Program

Fill in the form below & we'd get back to you.

PROGRAM OVERVIEW

While developing CCNP training, the main focus of MSP training is to concentrate on all those aspects that help in the professional growth of a candidate. Once the candidate is proficient, he or she can get a job easily after successful completion of the course. These skills help him or her, even to gain promotions to higher levels. We also give due importance to close observation to the skills pertains to routing, switching and checking of the candidate. The process of day to day evaluation kept in records for future reference.


PROGRAM CONTENT

Routing

Network Principles

  • Recognise Cisco Express Forwarding terms
  • Describe general web challenges
  • Analyse IP Working
  • Describe TCP working
  • UDP operations
  • Identify suggested changes to the network

Layer 2 Technologies

  • Arrange and verify PPP
  • Explain Frame Relay

Level 3 Skills and Tools

  • Categorise, design, and approve IPv4 addressing and subnetting
  • Acknowledge IPv6 addressing and subnetting
  • Arrange and verify static routing
  • Configure and genuine default routing
  • Classify routing protocol categories
  • Explain administrative distance
  • Check passive interfaces
  • Arrange and Scrutinise VRF Lite
  • Arrange and validate filtering with any protocol
  • Arrange and Scrutinise redistribution between any routing protocols and routing sources
  • Arrange and validate manual and auto-summarization with any routing protocol
  • Arrange and validate policy-based routing
  • Distinction of suboptimal routing
  • Explain ROUTE maps
  • Configure and authenticate loop prevention mechanisms
  • Configure and verify RIPv2
  • Describe RIPng
  • Describe EIGRP packet types
  • Configure and verify EIGRP neighbour relationship and authentication
  • Configure and verify EIGRP stubs
  • Configure and verify EIGRP load balancing
  • Describe and optimize EIGRP metrics
  • Configure and verify EIGRP for IPv6
  • Describe OSPF packet types
  • Constitute and validate OSPF neighbour relationship and authentication
  • Configure and validate network types, area types, and router types
  • Configure and verify OSPF path preference
  • Configure and verify OSPF operations
  • Configure and verify OSPF for IPv6
  • Describe, configure, and verify BGP peer relationships and authentication
  • Configure and verify e-BGP (IPv4 and IPv6 address families)
  • Explain BGP attributes and best-path selection

VPN Technologies

  • Configure and verify GRE
  • Describe DMVPN (single hub)
  • Describe Easy Virtual Networking (EVN)

Security of Infrastructure

  • Describe IOS AAA using local database
  • Define device security using IOS AAA with TACACS+ and RADIUS
  • Configure and verify device access control
  • Configure and verify router security features

Infrastructure Services

  • Configure and verify device management
  • Configure and verify SNMP
  • Configure and verify logging
  • Configure and verify Network Time Protocol (NTP)
  • Configure and verify IPv4 and IPv6 DHCP
  • Setup and validate IPv4 Network Address Translation (NAT)
  • Describe IPv6 NAT
  • Describe SLA architecture
  • Configure and verify IP SLA
  • Configure and check tracking objects
  • Fine-tune and validate Cisco Net Flow

SWITCHING (300-115)

Layer 2 Technologies

  • Configure and test switch administration
  • Configure and verify Layer 2 protocols
  • Configure and verify VLANs
  • Configure and verify trunking
  • Configure and test Ether Channels
  • Configure and verify spanning tree
  • Configure and check other LAN switching technologies
  • Describe chassis virtualization and aggregation technologies

Set-up Security

  • Configure and validate switch security features
  • Define device security using Cisco IOS AAA with TACACS+ and RADIUS

Setup Services

Configure and verify first-hop redundancy protocols

TROUBLESHOOTING (300-135)

Network Principles

  • Use Cisco IOS troubleshooting tools
  • Apply troubleshooting methodologies

Layer 2 Technologies

  • Troubleshoot switch administration
  • Troubleshoot Layer 2 protocols
  • Troubleshoot VLANs
  • Troubleshoot trunking
  • Troubleshoot Ether Channels
  • Troubleshoot spanning tree
  • Troubleshoot other LAN switching technologies
  • Troubleshoot chassis virtualization and aggregation technologies

Level 3 Know-hows

  • Troubleshoot IPv4 addressing and subnetting
  • Troubleshoot IPv6 addressing and subnetting
  • Troubleshoot static routing
  • Troubleshoot default routing
  • Troubleshoot administrative distance
  • Troubleshoot passive interfaces
  • Troubleshoot VRF Lite
  • Troubleshoot filtering with any protocol
  • Fine-tune between any routing protocols or routing sources
  • Troubleshoot manual and auto-summarization with any routing protocol
  • Troubleshoot policy-based routing
  • Troubleshoot suboptimal routing
  • Troubleshoot loop prevention mechanisms
  • Troubleshoot RIPv2
  • Troubleshoot EIGRP neighbour relationship and authentication
  • Troubleshoot loop-free path selection
  • Troubleshoot EIGPR operations
  • Troubleshoot EIGRP stubs
  • Troubleshoot EIGRP load balancing
  • Troubleshoot EIGRP metrics
  • Troubleshoot EIGRP for IPv6
  • Troubleshoot OSPF neighbour relationship and authentication
  • Fine-tune network types, area types, and router types
  • Troubleshoot OSPF path preference
  • Troubleshoot OSPF operations
  • Troubleshoot OSPF for IPv6
  • Troubleshoot BGP peer relationships and authentication
  • Troubleshoot e-BGP

 

CCNP Training (Cisco Certified Network Professional) Enquiry

 

Enquire Now


----- OR -------

Reach us at 0121 368 7851 or info@msptraining.com for more information.

ABOUT Kingston upon Hull

Kingston upon Hull is referred as a port city in the East Yorkshire, England with a population of around 260,200 according to mid-2016 est. It is commonly known as Hull, lies upon the northern bank where river Hull meets the Humber estuary. It is the unitary authority in the east Yorkshire located 154 miles north of London and 25 miles inland from the North Sea. The early settlement of the town can be found back to the 12th century. The port of the town was first used by the monks of the Meaux Abbey for exporting the wool. They selected their ideal place for building the quay at the concurrence of the rivers Hull and Humber. Since there is no clear evidence regarding the exact year of the foundation of the town, but it was first referred in 1193. During the 12th century, the town remained as a market town, trading hub and industrial metropolis.

The town is also known for having municipally owned telephone system since 1902. The Member of Parliament of the town contributed towards the abolition of the slave trade in the country. The town also served the theatre of battle in English civil wars took place between the Royalists and Parliamentarians. The town was severally affected by the Second World War and experienced the phase of post-industrial decline, brought socio-economic problems, unemployment and social deprivation. The town has undergone new housing, commercial and administration projects post the Great recession period in the early 21st century.

History

The early history of the town traced its roots back to the Neolithic period. The access to the flourishing hinterland and navigable rivers attracted the people of the surrounding areas for settlement. The name of the town is suggested to be originated from dwelling place or Vik meaning inlet. The River Hull was the ideal channel for exporting the wool from Meaux Abbey. The royal charter was granted to the town in 1293 by King Edward I and renamed the settlement as Kingston upon Hull. The port was developed into the leading port of the England and also served as a base during the First War of Scottish Independence. The wealth of the city grew with the import of timber and wine along with the export of wool and woollen cloth.

During the middle ages, the trading links of the town were extended all over the world and became the centre of the coastal trading network and booming inland. The town flourished during the 16th and early 17th century and major developmental projects came into existence. The town became strategically important due to the presence of large arms and ammunition firms in the English Civil War. Whaling (Hunting of whales) played a significant role in the growth of the economy until the mid-19th century. The city status was granted to the town in 1897. With the decline of the hunting industry, the focus shifted to the deep sea trawling till the Cod Wars between the United Kingdom and Iceland.

Economy

The economy of the town was based on the seafaring and trading. Earlier, trade was initiated in the merchant’s houses such as Blaydes House and centred on the Hull River, later on, shifted to the Humber docks. In 1970, the fishing industry faced the recession, and the city remained only the busiest port managing 13 million tons of cargo per year. The city is home to the several chemical and healthcare industries including Smith and Nephew and Reckitt Benckiser. After the recession in fishing and heavy industries, the wealth of the town is primarily based on travel and tourism, education, entertainment and retail sector.

Landmarks

The famous places to visit in the city are Streetlife Museum of Transport, The Humber Bridge, Hull Marina, East Park, Ferens Art Gallery, Wilberforce House Museum, Hull Maritime Museum, Hull and East Riding Museum, Hull History Centre and much more exciting places.