CCNP Training (Cisco Certified Network Professional)

Be proficient at switching and routing in networking

ABOUT THE PROGRAM

The Cisco Certified Network Professional (CCNP) training is designed for candidates who have one-year experience in the networking field. The job of  CCNP professionals is to plan, execute, confirm and repair both Wide Area Network and Local Area Network. In addition to this, they are also responsible to work with other network specialists to get the desired results. At MSP Training, we make sure the knowledge and skills that you learn from this platform provide you with a lasting foundation. It will not only benefit you today but also relevant in the physical as well as the virtualized networks in the succeeding years.

  • Get training from certified instructors

  • Key learning points and tutor support

  • Networking skills

  • Get salary hike with CCNP Professional status

WHAT'S INCLUDED ?

Find out what's included in the training programme.

Includes

Key Learning Points

Clear and concise objectives to guide delegates through the course.

Includes

Tutor Support

A dedicated tutor will be at your disposal throughout the training to guide you through any issues.

Includes

Courseware

Courseware will also be provided to the delegates so that they can revise the course after the training.

PREREQUISITES

The mandatory condition is to have one-year experience in the networking field. Such norms must be as needed by ICND1 and ICND2. Furthermore, those who want to possess some equivalent skill can also opt this course.

TARGET AUDIENCE

  • All the Web professionals
  • Web technical support staff
  • Helpdesk professionals
  • Those involved in implementation and verification of routing protocols in other networks.

.

WHAT WILL YOU LEARN?

 After successful completion of the course, the candidates will learn how to:

  • Plan layout and make a document.
  • Scrutinisation of routing protocols in enterprise network.
  • Recognise the terms, components, and metrics of EIGRP.
  • Recognise, Scrutinise, and match OSPF multiarea routing functions and benefits.
  • Execute and verify the redistribution solution in a multiprotocol network using Cisco IOS Software features.
  • Assess mutual web performance issues and recognise the tools that need to provide Layer 3 path control. Further, it can use Cisco IOS Software characteristic to command the path.
  • Execute and ensure a Layer 3 solution using BGP to fix an enterprise network to a service provider.

Enquire Program

Fill in the form below & we'd get back to you.

PROGRAM OVERVIEW

While developing CCNP training, the main focus of MSP training is to concentrate on all those aspects that help in the professional growth of a candidate. Once the candidate is proficient, he or she can get a job easily after successful completion of the course. These skills help him or her, even to gain promotions to higher levels. We also give due importance to close observation to the skills pertains to routing, switching and checking of the candidate. The process of day to day evaluation kept in records for future reference.


PROGRAM CONTENT

Routing

Network Principles

  • Recognise Cisco Express Forwarding terms
  • Describe general web challenges
  • Analyse IP Working
  • Describe TCP working
  • UDP operations
  • Identify suggested changes to the network

Layer 2 Technologies

  • Arrange and verify PPP
  • Explain Frame Relay

Level 3 Skills and Tools

  • Categorise, design, and approve IPv4 addressing and subnetting
  • Acknowledge IPv6 addressing and subnetting
  • Arrange and verify static routing
  • Configure and genuine default routing
  • Classify routing protocol categories
  • Explain administrative distance
  • Check passive interfaces
  • Arrange and Scrutinise VRF Lite
  • Arrange and validate filtering with any protocol
  • Arrange and Scrutinise redistribution between any routing protocols and routing sources
  • Arrange and validate manual and auto-summarization with any routing protocol
  • Arrange and validate policy-based routing
  • Distinction of suboptimal routing
  • Explain ROUTE maps
  • Configure and authenticate loop prevention mechanisms
  • Configure and verify RIPv2
  • Describe RIPng
  • Describe EIGRP packet types
  • Configure and verify EIGRP neighbour relationship and authentication
  • Configure and verify EIGRP stubs
  • Configure and verify EIGRP load balancing
  • Describe and optimize EIGRP metrics
  • Configure and verify EIGRP for IPv6
  • Describe OSPF packet types
  • Constitute and validate OSPF neighbour relationship and authentication
  • Configure and validate network types, area types, and router types
  • Configure and verify OSPF path preference
  • Configure and verify OSPF operations
  • Configure and verify OSPF for IPv6
  • Describe, configure, and verify BGP peer relationships and authentication
  • Configure and verify e-BGP (IPv4 and IPv6 address families)
  • Explain BGP attributes and best-path selection

VPN Technologies

  • Configure and verify GRE
  • Describe DMVPN (single hub)
  • Describe Easy Virtual Networking (EVN)

Security of Infrastructure

  • Describe IOS AAA using local database
  • Define device security using IOS AAA with TACACS+ and RADIUS
  • Configure and verify device access control
  • Configure and verify router security features

Infrastructure Services

  • Configure and verify device management
  • Configure and verify SNMP
  • Configure and verify logging
  • Configure and verify Network Time Protocol (NTP)
  • Configure and verify IPv4 and IPv6 DHCP
  • Setup and validate IPv4 Network Address Translation (NAT)
  • Describe IPv6 NAT
  • Describe SLA architecture
  • Configure and verify IP SLA
  • Configure and check tracking objects
  • Fine-tune and validate Cisco Net Flow

SWITCHING (300-115)

Layer 2 Technologies

  • Configure and test switch administration
  • Configure and verify Layer 2 protocols
  • Configure and verify VLANs
  • Configure and verify trunking
  • Configure and test Ether Channels
  • Configure and verify spanning tree
  • Configure and check other LAN switching technologies
  • Describe chassis virtualization and aggregation technologies

Set-up Security

  • Configure and validate switch security features
  • Define device security using Cisco IOS AAA with TACACS+ and RADIUS

Setup Services

Configure and verify first-hop redundancy protocols

TROUBLESHOOTING (300-135)

Network Principles

  • Use Cisco IOS troubleshooting tools
  • Apply troubleshooting methodologies

Layer 2 Technologies

  • Troubleshoot switch administration
  • Troubleshoot Layer 2 protocols
  • Troubleshoot VLANs
  • Troubleshoot trunking
  • Troubleshoot Ether Channels
  • Troubleshoot spanning tree
  • Troubleshoot other LAN switching technologies
  • Troubleshoot chassis virtualization and aggregation technologies

Level 3 Know-hows

  • Troubleshoot IPv4 addressing and subnetting
  • Troubleshoot IPv6 addressing and subnetting
  • Troubleshoot static routing
  • Troubleshoot default routing
  • Troubleshoot administrative distance
  • Troubleshoot passive interfaces
  • Troubleshoot VRF Lite
  • Troubleshoot filtering with any protocol
  • Fine-tune between any routing protocols or routing sources
  • Troubleshoot manual and auto-summarization with any routing protocol
  • Troubleshoot policy-based routing
  • Troubleshoot suboptimal routing
  • Troubleshoot loop prevention mechanisms
  • Troubleshoot RIPv2
  • Troubleshoot EIGRP neighbour relationship and authentication
  • Troubleshoot loop-free path selection
  • Troubleshoot EIGPR operations
  • Troubleshoot EIGRP stubs
  • Troubleshoot EIGRP load balancing
  • Troubleshoot EIGRP metrics
  • Troubleshoot EIGRP for IPv6
  • Troubleshoot OSPF neighbour relationship and authentication
  • Fine-tune network types, area types, and router types
  • Troubleshoot OSPF path preference
  • Troubleshoot OSPF operations
  • Troubleshoot OSPF for IPv6
  • Troubleshoot BGP peer relationships and authentication
  • Troubleshoot e-BGP

 

CCNP Training (Cisco Certified Network Professional) Enquiry

 

Enquire Now


----- OR -------

Reach us at 0121 368 7851 or info@msptraining.com for more information.

ABOUT Wokingham

Wokingham meaning ‘Wocca's people's home', situated 6 3 km from London to its West, and having a population of 30,690 is a market town. Wokingham, before 1974 when the local government was reorganized, was a borough. To form the current Wokingham District, it merged in 1974 it merged with Wokingham Rural District. Wokingham achieved the status of a borough in 2007.

Governance:

Northern Wokingham, at one time, was a detached part of Wiltshire that extended into the centre of the town – the area currently occupied by the Norreys, Bean Oak and Dowlesgreen estates. In 1844 it became a part of Berkshire. The then existing parish, in 1894, was divided into rural and urban civil parishes.

The Municipal Corporation Act of 1835 left Wokingham unformed. The Act was reformed in 1883. Due to the Local Government Act 1972, in 1974,  Wokingham and Wokingham Rural District merged to form the non-metropolitan district of Wokingham.  Formed as a unitary authority in 1998, the district has 54 elected councillors presided over by an elected councillor who manages the district and chairs (as a Chairman) all the meetings for a full year. The elections take place in three out of four years for the Chairman Councillor. Since 2002, the Conservative party has been in the seat with a majority. The Shute End is home to the Borough Council Offices in Wokingham.

Topography:

Located on the Emm Brook kin the Loddon Valley in central Berkshire, Wokingham is 33 miles west of central London and between the towns of Reading and Bracknell. Wokingham originally happened to be just a piece of agricultural land on the western front of the Windsor Forest. Wokingham’s soil is rich in loam and has a subsoil of gravel and sand.

The Wokingham town centre is replete with residential areas in almost every direction. The residential areas in the east are home to Dowlesgreen, Norreys, Keephatch and Bean Oak, in the west are Woosehill and  Emmbrook in the northwest. To the south, the areas include Wescott and Eastheath. Other residential areas include Woodcray and Luckley Green which have been present for a long time.

The last 8 decades have seen a lot of development in Wokingham. Dowlesgreen and Woosehill were built on farmland in the late 1960’s to the early 1970’s. Bean Oak was also developed during the same period. Keephatch came to be built in the '90s decade. The Norreys Estate came into existence in the 1960s. The  Norreys Avenue is. however, the oldest residential road having been built in the 1940’s. Norreys Avenue shaped as a horseshoe is located on Norreys Manor (now demolished). Because of this much of the manufactured houses were styled like those belonging to the 1940’s.The road also is home to some brick houses and to three blocks for police residential quarters.

Charities

Wokingham is home to a number of charities helping the needy. The list follows:

  • The Lucas Hospital: It is an almshouse founded in 1663 for helping sixteen elderly men who came here from the neighbouring location.
  • Wokingham United Charities: This charity provides various grants to people who live in the Wokingham area. They help them by getting rid of their poverty, distress and hardship. Besides they also provide shelter to the needy.
  • The Rotary Club of Wokingham: The club form a part of the Rotary International. It’s members take on many activities to raise funds for distributing to the needy whether locally or worldwide.

Churches

  • Wokingham Baptist Church
  • Wokingham Baptist Church
  • St Paul's Church
  • Wokingham Methodist Church
  • Christchurch Wokingham (CofE)
  • Woosehill Community Church
  • Norreys Church
  • Paul's Church (CofE)
  • Kings Church Wokingham
  • All Saints' Church (CofE)

Manors :

  • Evendon's Manor
  • Keep Hatch (demolished)
  • Norreys' Manor now named as Norreys Avenue )